JOURNAL ARTICLES [1] Orbak, A. Y. , O. S. Türkay,
E. Eşkinat and
K. Youcef-Toumi. Model Reduction
in the Physical Domain. Journal of Systems and Control Engineering, Proceedings of Institution of Mechanical Engineers Part I, Vol. 217, No. 6, pp. 481-496, December 2003. [pdf] [2]
Orbak, A. Y. , E. Eşkinat
and O. S. Türkay. Physical
Parameter Sensitivity of System Eigenvalues and Physical Model Reduction. Journal of the Franklin Institute, Vol. 341, No. 7, pp. 631-655, November 2004. [pdf] [3]
Aksoy, B. and A. Y. Orbak. Reducing the Quantity of
Reworked Parts in a Robotic Arc Welding Process. Quality and Reliability
Engineering International, Vol. 25, No. 4, pp.
495-512, DOI: 10.1002/qre.985, June 2009. [pdf] [4] Cengiz, T. G. and A. Y. Orbak. Bir Süt Ve Süt Ürünleri
İşletmesinde İş ve Zaman Etüdü Çalışması
ile Verimliliğin Arttırılması. International Journal of Engineering Research and Development, Vol. 2, No. 2, pp. 25-29, June 2010. [pdf] [5] Orbak, A. Y. , Cengiz, T. G., Ulusoy,
İ., Akgöz, H. K., Kiriş, M., and G. İrice. Bir Otomotiv Yan
Sanayi Firmasında Tek Modelli Ve Karışık Modelli Montaj
Hattı Dengeleme Problemi. Endüstri Mühendisliği Dergisi, Vol. 22, No. 1, pp. 21-30, May
2011. [pdf] [6] Orbak, A. Y. Shell Scrap Reduction of Foam Production and Lamination Process in Industry. Total Quality Management and Business
Excellence, Vol. 23, No.
3-4, pp. 325-341, March
2012. [pdf] CONFERENCE PROCEEDINGS
(INTERNATIONAL) [7]
Orbak, A. Y. , K. Youcef-Toumi
and Masaaki Senga. Model Reduction and Design of a Power Steering System. Proceedings of the American Control Conference, ACC99, pp.
4476-4481, June 1999. [pdf] [8]
Öncel, F. and A.Y. Orbak. Parameter
Dependent Control Law
Design with Applications to
Nonlinear Systems. Proceedings of ASME 6th Biennial
Conference on Engineering Systems
Design and Analysis, ESDA2002, APM-105, July 2002. [pdf] [9] Orbak, A. Y. , O. S. Türkay and E. Eşkinat. Model Reduction
in the Physical Domain. Proceedings of ASME 6th Biennial
Conference on Engineering Systems
Design and Analysis, ESDA2002, APM-019, July 2002. [pdf] [10] Öztürk, L., A. Y. Orbak
ve E. Eşkinat. Positive
Real Decentralized Controller Synthesis
for Vibration Control. Proceedings of ASME 6th Biennial
Conference on Engineering Systems
Design and Analysis, ESDA2002, APM-100, July 2002. [pdf] [11] Orbak, A. Y. Modeling and Full State Feedback Adaptive Control
of a Two Dimensional Linear Motor. Proceedings of
2003 IEEE Conference on Control Applications, CCA 2003, pp.
791-796, June 2003. [pdf] [12] Orbak, A. Y. and E. Eşkinat. Influence of Physical Parameters on System Eigenvalues and Its Use
in Physical Model Reduction.
Proceedings of 2003 IEEE Conference on Control
Applications, CCA 2003, pp. 1070-1075, June 2003. [pdf] [13] Öztürk, L., A. Y. Orbak
and E. Eşkinat. Velocity
Feedback Vibration Controller Synthesis:
LMI Approach. Proceedings
of 2003 IEEE Conference on Control Applications, CCA 2003, pp. 522-525, June 2003. [pdf] [14] Erdiller, A. and A. Y. Orbak. Genetic
Algorithm Based Approach for the Integrated Job Shop Scheduling and Operations Planning Problem. EURO/INFORMS Istanbul 2003, July 2003. [pdf] [15] Öztürk, L., A. Y. Orbak
and E. Eşkinat. An LMI Based
Approach for Velocity Feedback Vibration
Controller Synthesis. Proceedings
of IEEE International Conference on Mechatronics
2004, ICM04, pp. 369-374, June
2004. [pdf] [16] Erdiller, A. and A. Y. Orbak. Application of Genetic Algorithms to Alternative Operation Sequencing for Manufacturing Plants. Proceedings of 12th Mediterrenean Conference on Control and
Automation, MED04, June
2004. [pdf] [17] Orbak, A. Y. Modeling and Adaptive Control of a Coordinate
Measuring Machine. Proceedings
of the American Control
Conference, ACC04, pp. 2889-2894, June 2004. [pdf] [18] Erdiller, A. and A. Y. Orbak. An Implementation
Example for the Improvement of Manufacturing Processes Using Six Sigma Tools. Proceedings of 35th
International Conference on Computers and Industrial Engineering, CIE2005, pp.
625-629, June 2005. [pdf] [19] Çağlar, B., Özmutlu, H. C., Orbak,
A. Y. , and S. Özmutlu. Statistical Procedures
for Robotic Assembly Line Balancing Problems. Proceeding of the 24th European Conference on
Operational Research,
EUROXXIV Lisbon, pp. 166,
July 2010. [pdf] [20]Küçük, M. and A. Y. Orbak. Six Sigma
Approach for the Reduction of Transportation Costs of a Pipe Manufacturing Company, Proceedings of 2011
IEEE International Conference on Quality and Reliability, ICQR2011, pp. 541-545, September 2011. [pdf] [21] Gençosman, B. Ç., Orbak, A. Y. ,
and İ. Orbak. Factor
Analysis and Response Surface Optimization for Copper Removal
from Aqueous Solutions. Proceedings
of the 2012 International Conference on Industrial Engineering and Operations Management, IEOM2012, pp.
1286-1291, July 2012. [pdf] [22]Orbak, A. Y. and M. Küçük. Use of Mathematical Programming in the
Improvement Phase of Six Sigmas DMAIC Approach for a Pipe Manufacturing Company Proceeding of The International IIE (Institute
of Industrial Engineers)
Conference, The Global Reach of IE with XXXIIIrd National Congress of Operations
Research/Industrial Engineering YA/EM 2013, pp. 53,
June 2013. [pdf] [23]Orbak, A. Y. and İ. Orbak. An
Application of Vehicle Routing Problem for an Air Conditioning
Company Proceeding of The International IIE (Institute
of Industrial Engineers)
Conference, The Global Reach of IE with XXXIIIrd National Congress of Operations
Research/Industrial Engineering YA/EM 2013, pp. 106,
June 2013. [pdf] CONFERENCE PROCEEDINGS
(NATIONAL) [24]Orbak, A. Y. Fiziksel Sistem Modellerinin Bond Çizge
Yöntemi ile İndirgenmesi. Proceedings of
Otomatik Kontrol Ulusal Toplantısı TOK01, pp.
69-74, October 2001. [pdf] [25]Orbak, A. Y. Özdeğer-Özvektör
Analizi ile Fiziksel Model İndirgenmesi. Proceedings
of Otomatik Kontrol Ulusal Toplantısı TOK02, pp.
29-37, September 2002. [pdf] [26]Orbak, A. Y. and L. Öztürk. Doğrusal Matris
Eşitsizlikleri Yardımıyla Titreşim Sistemlerinin
Dağıtılmış Denetimi. Proceedings
of Otomatik Kontrol Ulusal Toplantısı TOK02, pp.
149-158, September 2002. [pdf] [27]Erdiller, A. and A.
Y. Orbak. Atölye Tipi Çizelgeleme ve Operasyon
Sıralama Problemine Genetik Algoritma Tabanlı Bir
Yaklaşım. Proceedings of the 3rd National Manufacturing Research Symposium, ÜAS2003, pp.
133-140, April 2003. [pdf] [28]Orbak, A. Y. and Erdiller. Genetik Algoritmanın Çizelgeleme Problemlerinde
Kullanımı. Proceedings of the 3rd National Manufacturing Research Symposium, ÜAS2003, pp.
141-147, April 2003. [pdf] [29]Orbak, A. Y. Fiziksel Parametre Değişimlerinin
İncelenmesi ve Etki Matrisleri. Proceedings
of Otomatik Kontrol Ulusal Toplantısı TOK05, pp.
155-159, June 2005. [pdf] [30]Orbak, A. Y. and S. Özmutlu. Üretim Otomasyon Sistemlerinde
Robot Kullanımı. XXVth National Congress of Operations Research/Industrial Engineering YA/EM
2005, 4-6 July 2005. [pdf] [31] Erdiller, A. and A. Y. Orbak. Otomotiv Yan Sanayinde
Altı Sigma Araçlarının Kullanımı
ve Bir Uygulama Örneği. Proceedings of the 5th National Manufacturing Research Symposium, ÜAS2005, pp.
557-559, November 2005. [pdf] [32]Orbak, A. Y. and S. Bilgin. Kanban
Sisteminin Bir Uygulama Örneği. Proceedings
of the 5th National Manufacturing Research Symposium, ÜAS2005, pp.
289-293, November 2005. [pdf] [33]Orbak, A. Y. , Özmutlu, S., Özmutlu, H. C., and A. Orbak. Üretim Sistemlerinde
Robot Çizelgeleme Probleminin İncelenmesi. Proceedings
of Design Manufacturing Analysis Congress TİMAK2006, pp.
491-498, April 2006. [pdf] [34]Orbak, A. Y. , Özalp, B.T., Korkmaz, P., Yarkın, N., Aktaş, N., and A.
Dinçer. Karışık Modelli Bir Montaj Hattında Hat
Dengeleme Çalışmaları.
XXIXth National Congress of Operations Research/Industrial Engineering YA/EM
2009 Proceedings, 22-24 June
2009. [pdf] [35]Orbak, A. Y. , Cengiz, T. G., Ulusoy, İ., Akgöz, H. K., Kiriş, M., and G.
İrice. Tek Modelli ve Karışık Modelli Montaj Hattı
Dengelemede Kutu İçi Malzeme Miktarının Optimizasyonu. XXIXth National Congress of Operations Research/Industrial Engineering YA/EM
2009 Proceedings, 22-24 June
2009. [pdf] [36]Orbak, A. Y. Hankel Tekil
Değerlerinin Sembolik Hesabı ve Doğrusal Sistemin Statik
Kazancının İncelenmesi.
Proceedings of Otomatik Kontrol Ulusal
Toplantısı TOK09, October 2009. [pdf] [37]Biçer, E., Yaşaroğlu, K.,
Mete, H. , Çetin, M., Orbak, A. Y. ,
and H. C. Özmutlu. Bir otomotiv firmasında montaj departmanı
tesis yerleşimi ve iş atama problemlerinin incelenmesi. XXXth National Congress of Operations Research/Industrial Engineering YA/EM
2010 Proceedings, pp. 38,
June 2010. [pdf] [38]Orbak, A. Y. Özalp, T., Saygısever, M., Yılmaz, D., and M. Kozpınar. Bir otomotiv firması vites kutusu departmanında istatistiksel kalite kontrol
çalışmaları. XXXth National Congress of Operations
Research/Industrial Engineering YA/EM 2010 Proceedings,
pp. 269, June 2010. [pdf] [39]Serper, B., Aygün, İ.,
Gümüşbaş, T. Ç., Orbak, A.
Y. , and T. G. Cengiz. Endüstriyel mutfak ekipmanları
üreten bir firmada hat dengeleme uygulamaları. XXXth
National Congress of
Operations Research/Industrial
Engineering YA/EM 2010 Proceedings,
pp. 79, June 2010. [pdf] [40]Sütman, B.,
Akdemir, F., Osmanoğlu, C. Orbak,
A. Y. and B. T. Özalp. Bir
otomotiv yan sanayi firmasında çekme sisteminin
oluşturulması. XXXIst National Congress of Operations
Research/Industrial Engineering YA/EM 2011 Proceedings,
pp. 157, July 2011. [pdf] [41] Gençosman, B. Ç., Orbak, A. Y.,
and İ. Orbak. Endüstride Kullanılan Sulu Çözeltilerden Kadmiyum
Ayrışımı için Faktör Analizi ve Cevap Yüzeyi Yöntemi
Kullanımı. XXXIInd National
Congress of Operations Research/Industrial Engineering YA/EM
2012 Proceedings, pp.
112-113, June 2012. [pdf] [42]Özbelli, F.,
Alagöz, H., Taş, S., Orbak, A. Y.,
and H. C. Özmutlu. Bir Otomotiv Yan Sanayii Firmasında Kablo Kesme
Hattında Paralel Makine Çizelgeleme Probleminin İncelenmesi. XXXIInd National Congress of Operations Research/Industrial Engineering YA/EM
2012 Proceedings, pp.
118, June 2012. [pdf] [43]Arı, B., Yavuz, E. C.,
Durmuş, S., Orbak, A. Y., and
M. Akansel. Bir Otomotiv Ana Sanayi Firmasında Değişen Üretim
Planına Bağlı Ambar İçi Yerleşim ve Parça
Dağıtım Rotalaması Optimizasyonu. XXXIInd
National Congress of
Operations Research/Industrial
Engineering YA/EM 2012 Proceedings,
pp. 119, June 2012. [pdf] [44]Kazıklılı, D. Devirmiş, F. Filiz, E., Orbak, A. Y.,
and S. Özmutlu. Otomotiv Yan Sanayi Firmasındaki Bir Ürünün Seri Üretim
Konsept Tasarımı. XXXIInd National Congress of Operations
Research/Industrial Engineering YA/EM 2012 Proceedings,
pp. 119-120, June 2012. [pdf] [45]Akgül, B. Hanazay, Ş., Koç, K.
K., Orbak, A. Y., and B. T. Özalp.
Otomotiv Sektöründe Faaliyet Gösteren Bir Firmada Enjektöre Çubuk Filtre
Çakma Sürecindeki Minimum-Maksimum Kuvvet Hatasının Deneyler ile
Tespiti ve Sorunun Çözümü. XXXIInd National Congress of Operations
Research/Industrial Engineering YA/EM 2012 Proceedings,
pp. 263, June 2012. [pdf] [46]Orbak, A. Y. and T. G. Cengiz. Titreşim
Sönüm Elemanları Üreten Bir Firmada İstatistiksel Kalite Kontrolü
Ve Deney Tasarımı Yöntemleri İle Süreçlerin
İyileştirilmesi. Proceedings of the Third National Design Manufacturing and Analysis Congress TİMAK2012, pp. 1-8,
November 2012. [pdf] [47]Akansel, M., Çavdur
F., and A.
Y. Orbak. Bir Dağıtım Ağında Tedarikçi
Kontrollü Envanter Yönetim Politikası Bileşenlerinin Benzetim
Yaklaşımıyla Belirlenmesi, XXXIVth National Congress of Operations
Research/Industrial Engineering YA/EM 2014 Proceedings,
pp. 126-127, June 2012. [pdf] [48]Ulubay A., Denizer G., Orbak A. Y., and B. T. Özalp. Bir Otomotiv Ana Sanayi
Firmasında Bakım Planlama ve İş Yükü Dengeleme Aracı
Geliştirilmesi, XXXIVth National
Congress of Operations Research/Industrial Engineering YA/EM
2014 Proceedings, pp.
32-33, June 2012. [pdf] POSTER CONFERENCE
PROCEEDINGS [49]Orbak, A. Y. Bir Koordinat Ölçme Makinasının
Uyarlanır Denetimi. Proceedings of Otomatik
Kontrol Ulusal Toplantısı TOK02, pp.
583-589, September 2002. [pdf] INVITED CONFERENCE
PROCEEDINGS [50]Orbak, A. Y. and A. Erdiller. Application of Genetic Algorithms to Scheduling Problems. EURO/INFORMS Istanbul
2003, July 2003. [pdf] BOOKS [51] Orbak, A. Y. Physical Model Reduction: A
Bond Graph Approach for Engineering Systems. LAP Lambert Academic
Publishing, ISBN-13: 978-3838349855, ISBN-10:
3838349857, June 2010. |
Last updated on Thu Sept. 18 14:00:00 EST 2014